Shot Blasting Machine Machine Outer Width 4500mm Turbine Diameter
320 mm
In addition to removing surface contaminants, shot blasting can
also improve the fatigue life of the cylinders by inducing
compressive stress on their surfaces, which helps to prevent
cracking and other forms of material failure.
Shot blasting is a relatively fast and efficient process, requiring
only a few minutes to clean and prepare each cylinder. However, it
can also be quite noisy and may generate significant amounts of
dust, which can be harmful to workers if not properly controlled.
The main characteristics of the Shot Blasting Machine are:
(Note: According to the customer request, properties will change)
| Machine Type | Shot Blasting Machine |
| Main Structure | Reinforced steel structure with high grade steel plates in main
cabinet |
| Input LPG Cylinder | Heat treated cylinders |
| Nominal Capacity | 500 Cylinders per hour |
| Surface Cleanness Quality | Bsa2.5 |
| Number of Turbines | 8 |
| Number of pallets in turbines | 6 |
| Turbine Diameter | 320 mm |
| Machine Outer Width | 4500 mm |
| Machine Outer Length | 9550 mm |
| Machine Height | 5400 mm |
Separator:
Elevator:
Lower Cabin:
Main Cabin:
Dust Filtering Unit:
Control Panel:
Blasting Chamber
Lower cabin with helical mover
LPG Cylinder Rotation and Moving System
Elevator
Sift & Separator
Dry Filter Unit (dust collector)
Shot medium, coarse particles and dust are separate
Driven by motor, redactor and chain drive
Mechanical operation of shifts
Motor redactor chain driven buckets
Made out of 4 mm thick steel
Completely covered bearings
Made out of steel construction
Motor redactor chain driven helical carriage
Blasting medium is led towards elevator by helical carriage
Three turbines hanging on the ceiling
Wear resistant rubber screens at entrance and exit
Rotation of cylinders
Transfer of cylinders from input to output
Filtering of dust
Centrifugal filtering additional
Water filter to convert dust to mud
Provides control buttons and indicators
High quality electric components
Monitoring of turbine capacities
Pneumatic control of turbine outputs
What Service Do We Provide?
Pre-sales Service: Customized design of the overall production line scheme according
to customer site, environment, output, budget, and product
requirements
On-sale Service: Tracking the manufacturing progress of the whole line of
equipment, quality control, product proofing and trial production
After-Sales Service: Equipment installation, testing, training, project acceptance
Maintenance Service: Regular inspection and maintenance of the entire line, providing
genuine accessories, 24-hour online service
FAQ
Q: What size of LPG cylinder your machine can produce?
A: 6kg, 12kg,15kgs and 50kgs LPG cylinder for cooking and other
size according customers' requirement.
Q: Can you design machines according LPG cylinder technical
drawing?
A: Sure, please send your technical drawing to us.
Q: What are the benefits to choose your machines?
A: Our machines are strong and reliable for long term industrial
manufacturing
We need to know following information to quote you correct
machines:
1. Technical Drawing of the cylinders you want to make?
2. What size of cylinder you want to produce?(such as 6kg, 12kg)
3. What diameter and thickness of the cylinder you want to make?
4. Are you new in this area or you already have some machines in
the workshop?
5. Capacity you require, i.e. how many pieces and sizes you want to
make per day?
